Access G3 Elevator Starter Kit

Key details

BrandUbiquiti

Manufacturer modelUA-G3-SK-Elevator

InstallationQuoted separately

In the Box(1) Elevator Hub (1) G3 Reader (2) 2-wire PoE extenders (10) Access Cards

Touch Pass10 free 1-year Touch Passes included Learn More

Dimensions129.3 x 244.7 x 33.6 mm (5.1 x 9.6 x 1.3")

Maximum User Count6,000

Power MethodPoE++ UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU

Weight537 g (1.2 lb)

Enclosure MaterialPolycarbonate

Mounting MaterialPolycarbonate

Networking Interface(4) 10/100/1000 Base-T

PoE Interface(1) PoE++ input, 50V DC, 1.2A (4) PoE+ outputs, 50V DC, 30W per port (Max 45W aggregated)

Management(1) 10/100/1000 Base-T

Max. Power Consumption7W (Without PoE output)

Digital Input(1) Emergency (1) Car position (5-bit) (1) Car status: Up/Down/Stop/Full (1) Door status: Open/Close

Outputs(18) Relays Rating 30V DC/2A

ESD/EMP ProtectionAir: ± 8kV, contact: ± 4kV

LEDsB/W Learn More

Buttons(1) Factory reset Terminal blocks

Ambient Operating Temperature-10 to 40° C (14 to 104° F)

Ambient Operating Humidity5 to 95% noncondensing

CertificationsCE, FCC, IC, UL 62368-1, CSA C22.2 No. 62368-1

Management ApplicationUniFi Access

Software InformationThe software version can be checked at https://unifi.ui.com

Dimensions93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4")

WeatherproofingIP55

Weight82 g (2.9 oz)

Enclosure MaterialPolycarbonate, glass

Mount MaterialAluminum alloy

MountingIn-wall, gang box (Included) Junction box (Optional)

Networking Interface(1) 10/100 MbE RJ45 port

ConnectivityBLE 4.1 NFC

Power MethodPoE UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU

Max. Power Consumption5W

Supported Voltage Range48V DC

ESD/EMP ProtectionAir: ± 15kV, contact: ± 8kV

SensorsProximity sensor

SpeakerYes

LEDsR/G/B/W Learn More

Button(1) Factory reset

NFC Frequency13.56 MHz

NFC Read Range< 30 mm (1.18'')

NFC TechnologyISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340) MIFARE Classic / MIFARE DESFIRE Sony FeliCa™ (ID only) NFC Forum tags T1T, T2T, T3T, T4T and T5T ECP 2.0

PoE Cabling RequirementsCat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords; 24 AWG (0.21 mm² ) for horizontal or riser cable.

UL 294 LevelDestructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I

UL 294 StatementCompliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.

CAN/ULC-60839-11-1 GradeGrade assignment: I

Ambient Operating Temperature-30 to 45° C (-22 to 113° F)

Ambient Operating Humidity5 to 90% noncondensing

CertificationsCE, FCC, IC, SRRC, UL 294, CAN/ULC-60839-11-1

Dimensions85.6 x 53.98 x 0.84 mm (3.37 x 2.13 x 0.03")

Weight5 g (0.18 oz)

FormatISO 7810 ID-1

NFC TechnologyISO/IEC 14443 Type A MIFARE DESFire UniFi Access Proprietary Security Protocol

ModelUACC-Extender-2Wire-PoE-Tx/Rx

Dimensions40 x 105 x 25 mm (1.6 x 4.1 x 1")

WeightPoE in: 77 g (2.7 oz) PoE out: 79 g (2.8 oz)

Networking Interface(1) 10/100 MbE (1) Homeplug AV

PoE InterfacePoE input: (1) PoE++, 50V DC, Max. 1.2A PoE output: (1) PoE+, 48V DC, 0.72A

Management(1) 10/100 MbE

Power MethodPoE++

Max. Power Consumption3W (Without PoE output)

Recommend Max. Cable LengthLearn More

LEDsWhite

CertificationsCE, FCC, IC

Equipment price$1,298.70

Highlights

• Equipment only; installation is quoted separately
• Select the required configuration before ordering