Access Retrofit Hub

Key details

BrandUbiquiti

Manufacturer modelUA-Retrofit-Hub-2

InstallationQuoted separately

Additional Inputs2 Additional Inputs

Lock Terminals2 Lock Terminals

AUX Terminals2 AUX Terminals

Dimensions140 x 120 x 45 mm (5.5 x 4.7 x 1.8")

Supported Doors2

Maximum User Count10,000

Input Terminals(2) Third-party Wiegand Reader / UniFi Retrofit Reader (2) Door exit request (2) Door position (1) Emergency

Power Method12/24V DC

UL 294 LevelDestructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I

Weight420 g (14.8 oz)

Enclosure MaterialPolycarbonate

Mount MaterialSGCC steel

MountingDin-rail (Included)

Digital Input(2) Third-party Wiegand Reader / UniFi Retrofit Reader (2) Door exit request (2) Door position (1) Emergency

Dry Output RelayLock: rated 30V DC, up to 1A Aux: rated 30V DC, up to 1A

Powered Output Relay12V Lock: 12V DC, up to 1A 24V Lock: 24V DC, up to 0.5A

Indoor and Outdoor UseIndoor only

Ambient Operating Temperature-10 to 40° C (14 to 104° F)

Ambient Operating Humidity5 to 90% noncondensing

Networking Interface(2) 10/100 MbE RJ45 ports

Power SupplyDC 12/24V

Max. Power Consumption50W

Reader Power Output12V DC, up to 0.5A

LEDsW/B Learn More

Buttons(1) Factory reset (2) 12V/Dry/24V switch

UA-Retrofit-Reader (250mA)18 UACC-Cable-DoorLockRelay length: 152.4 m (500 ft)

UA-Lock-Electric (400mA)24 AWG length: 25 m (82 ft) 22 AWG length: 42 m (138 ft) 20 AWG length: 66 m (217 ft) 18 UACC-Cable-DoorLockRelay length: 100 m (328 ft)

UA-Lock-Magnetic-540kg (500mA)24 AWG length: 20 m (66 ft) 22 AWG length: 32 m (105 ft) 20 AWG length: 51 m (167 ft) 18 UACC-Cable-DoorLockRelay length: 80 m (262 ft)

UA-Lock-Magnetic-270kg (800mA)24 AWG length: 12 m (39 ft) 22 AWG length: 20 m (66 ft) 20 AWG length: 30 m (98 ft) 18 UACC-Cable-DoorLockRelay length: 46 m (151 ft)

Other locks (1A)24 AWG length: 9 m (30 ft) 22 AWG length: 15 m (49 ft) 20 AWG length: 24 m (79 ft) 18 UACC-Cable-DoorLockRelay length: 36 m (118 ft)

PoE Cabling RequirementsCat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords; 24 AWG (0.21 mm² ) for horizontal or riser cable.

UL 294 StatementCompliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.

CAN/ULC-60839-11-1 GradeGrade assignment: I

CertificationsCE, FCC, IC, UL 294, CAN/ULC-60839-11-1

Document number, and issue date and/or revision levelUA-Retrofit-Hub-2, V01

Management ApplicationAccess

Software InformationThe software version can be checked at https://unifi.ui.com

Equipment price$327.60

Highlights

• Equipment only; installation is quoted separately
• Select the required configuration before ordering