Pull to refresh
Back to product
Valence Connected
Valence ConnectedProfessional equipment · Design · Installation
Valence Connected product specification

UPS 2U Pro

UniFi-managed 1.92kVA rackmount UPS with pure sine wave output, 8 individually controllable outlets with per-port power monitoring and remote power cycling, a hot-swappable 720Wh battery, and up to 22 minutes of runtime at half load 960W. Supports Graceful Shutdown for UNVR and UNAS, and NUT compatibility for third-party devices. Requires : UniFi OS 5.1.25 or later UniFi Network 10.5.67 or later UniFi Mobile Android 10.39.3 or later UniFi Mobile iOS 10.36.1 or later Note . For Graceful Shutdown functionality, UniFi OS version 4.4.3 or higher is required.

Networking & Wi-Fi product — UBNT-CATALOG-UPS-2U-PRO-US

Product overview

UniFi-managed 1.92kVA rackmount UPS with pure sine wave output, 8 individually controllable outlets with per-port power monitoring and remote power cycling, a hot-swappable 720Wh battery, and up to 22 minutes of runtime at half load 960W. Supports Graceful Shutdown for UNVR and UNAS, and NUT compatibility for third-party devices. Requires : UniFi OS 5.1.25 or later UniFi Network 10.5.67 or later UniFi Mobile Android 10.39.3 or later UniFi Mobile iOS 10.36.1 or later Note . For Graceful Shutdown functionality, UniFi OS version 4.4.3 or higher is required.

Key details

BrandUbiquiti

Manufacturer modelUPS-2U-Pro

InstallationQuoted separately

Dimensions442.4 x 87.4 x 630 mm (17.4 x 3.4 x 24.8")

Weight32 kg (70.5 lb)

Enclosure MaterialGalvanized steel

Form FactorRack mount (2U)

WeatherproofingIP20

ManagementEthernet

Networking Interface(1) 100/10 MbE port for network connection (2) GbE ports for surge in/out

Power(1) OVC II AC in: NEMA 5‑20P (8) Battery backup/surge protection: NEMA 5‑20R

Capacity1920VA/1920W

TypeLine interactive

Input Voltage Range89–145V AC

Power Method(1) TN system, 120V AC, 16A Max., 50/60 Hz

Nominal Input Voltage120V AC

Output Voltage120V AC

Nominal Output Voltage120V AC

Frequency RangeAC mode: 50/60 Hz ±5 Hz (Auto sensing) Battery mode: 60 Hz ±1 Hz

AC Voltage Regulation±1.5% (Battery mode)

Transfer Time6 ms typical; 10 ms max. (Battery mode)

Wave FormPure sine wave (Battery mode)

Battery Type(1) Lead Acid 72V, 10Ah

RuntimeFull load: 9 min Half load: 22 min

Battery Charging Time8 hours recovery to 90% capacity

Overload at On-Line Mode103–120% 5 min go to fault 120–150% 10 sec go to fault 150% 1 sec go to fault

Overload at Battery Mode103–120% 1 min go to fault 120–150% 10 sec go to fault 150% 0.5 sec go to fault

Short Circuit Protection at On-Line ModeBreaker, 250V AC, 20A

Display3.7” touchscreen

Buttons(1) Power (1) Factory reset (1) Circuit breaker

StatusOff: device not turned on Flashing white: initializing / factory default Steady white: waiting for adoption Steady blue: device adoption and working Flashing blue: battery mode Alternating white/blue: firmware upgrading Rapid flashing blue: locate Steady red: warning Flashing red: low battery

Operating Altitude3,000 m (1.9 mi)

Operating EnvironmentPollution Degree 2

Ambient Storage Temperature-15 to 50° C (5 to 122° F)

Ambient Operating Temperature0 to 40° C (32 to 104° F)

Ambient Operating Humidity0 to 95% noncondensing

CertificationsFCC, IC, UL 1778, CSA C22.2 No. 107.3

Mobile AppsiOS™: Version 10.36.1 and later Android™: Version 10.39.3 and later

UniFi NetworkVersion 10.5.67 and later

Equipment price$972.40

Highlights

  • Equipment only; installation is quoted separately
  • Select the required configuration before ordering

Additional manufacturer documents

  • Official product details · Manufacturer website
  • Installation guide · Manufacturer website
Ubiquiti UPS 2U Pro specifications | Valence Connected